Steps That Professionals Need to Take for Door Architrave Installation


Door Architraves not just give structural support to your doors — they add to their beauty and contribute immensely to the overall aesthetic look and feel of your home. Thus, when it comes to the installation of door architraves at your home in Hornsby, Cherrybrook, Dural, or elsewhere, you need to hire the very best experts in this field. In this write-up, we discuss the steps that the door architrave installation professionals in Dural or elsewhere will follow to install these architraves at your property.

Step#1: Cutting the Door Lining

At first, they would set the lining of the back door between 5 to 10 mm around the entire door frame, so that the architrave does not protrude too far, forming an eyesore. They will set it uniformly all along the lining all the way around so that the lining gels seamlessly with the entire frame.

Step#2: Measuring and Marking the Door Frame

New, the professionals would measure the width and the height of the door frame and then mark the outline of where the architrave will get in. For a standard door somewhere between 2.1 and 2.4 meters for both the vertical sides and around 1 meter for the horizontal top will be needed.

Step#3: Measuring and Cutting the Timbers

Now, the professionals offering door architrave installation services in Cherrybrook like anywhere else would measure the timbers to the lengths that are needed to fit in the door frame structure and mark them. They will follow it up by cutting to the marked lines, for making two vertical lengths and one horizontal length for the two sides and the top of the door respectively.

Step#4: Cutting and Fixing the Two Sides

Now, starting with the two vertical sides, they will hold the timber in their respective positions and measure an angle of 45 degrees, from the top corner of the doorway. Using a mitre saw, they will cut along the angle carefully, till the top corner, maintaining the angle. Then they will fix it to the door linin using wood glue and then drive nails to provide extra security. The same steps are repeated for the other side.

Step#5: Cutting and Fixing the Top Architrave

Now that the two parallel sides are in their respective place, it’s time for the professional providing door architrave installation services near Hornsby as anywhere else, to cut the opposing mitres on both the sides of the timber, for the top architrave. If the measurement has been accurate, the pieces will surely fit together tightly. Thus, all they need to do is to glue and then nail them into their place to complete the installation.

Now, it’s time for fine-tuning the architraves after all of them have been fixed. The professional will have to make some minor adjustments, or do some cutting and trimming to give the structure the final shape.

Once the professional is done with the installation, they will paint the architrave to complete the work.


Location: Australia

Comments

Post a Comment

Popular posts from this blog

DIY Tips for Perfect Skirting Board Installation At Home

Image
Skirting boards are important for a room. Also referred to as baseboards, skirting boards can easily be installed. If you want to replace the old with fresh new boards to give your room a makeover we will tell you how to go about with the process but first you will need to have certain basic supplies and tools for the DIY project. Let’s have a look: Removing the Old Boards and Measuring the Walls Skirting boards are a part of the wall. That’s why when you want replacements you will need to remove the older boards. To remove an old skirting first get a bolster chisel. Using a hammer gently tap blades of the bolster chisel. Now, insert the crowbar in between gaps and take off the board from the wall. Use Measuring Tapes to Take Measurement of the Wall Stretch the tape and take measurement by placing it along the bottom of a wall. Write down the measurements and add them up. Meanwhile you can draw a sketch of the available space for flawless skirting board installation in Kellyville ....
Read more

Different Types of Architraves to Make Your Room Look Gorgeous

Image
Different types of architraves add beauty to the doorframes and each one has a different appeal. So, if you are planning to add an architrave, you will need to look at each design and then choose the one that can go well with your house. So, let us take a look at some of the architraves now. Flat frame architrave If you are in Bella Vista and want to give a simple yet elegant look to the door frame in your room, you can go for an internal architrave door set in Bella Vista that comprises a flat frame architrave. It comprises a curved edge and this is used by many clients in their homes. Another interesting fact is that these architraves can be found in plenty. So, if you are planning to give a clean look to the door frame as well as your room, you can go for this type of architrave. Decorative frame architrave If, on the other hand, you plan to choose an ornamental look with beautiful grooves on it, a decorative architrave is the best one that you can choose. This type of a...
Read more